|
COUNTIS M03 / M13 Energy meters Single-phase - direct 45 A & 100 A SOCOMEC COUNTIS M03 & M13 are energy meters designed for single-phase metering direct connection for 45 A & 100 A mounted on a standard DIN rail. It supports RS485 communication and is suited for domestic and commercial power distribution systems. Functions COUNTIS single phase meter is a modular electrical energy meter which can display active energy(kWh) and other data on LCD screen. The meter is intended to record single-phase load energy, with direct connection of 45 A & 100 A. The product ensures superior measurement accuracy of 1% even at low currents. Benefits• Reduction of energy costs by tracking the consumption pattern through multiple electrical parameters in one device. • Avoid frequent site visits. Countis M series with RS485 & pulse output will enable you to configure & monitor remotely your installation. • The meter can calculate active power demand and maximum demand value. • Multi-parameter monitoring: I, V, P, Q, S and PF, etc. • 2 channels of pulse output (the first can be set) |
 |
|
Energy meters Three-phase - direct 100 A & up to 6000 A via CT SOCOMEC COUNTIS M03 & M13 are energy meters designed for single-phase metering direct connection for 45 A & 100 A mounted on a standard DIN rail. It supports RS485 communication and is suited for domestic and commercial power distribution systems. Functions COUNTIS M33 & M43 are energy meters intended to measure and display total active energy (kWh), reactive energy (kVarh) and other values. It also monitor demand and total harmonic distortion. Benefits• Reduction of energy costs by tracking the consumption pattern through multiple electrical parameters in one device. • Avoid frequent site visits. Countis M series remote transmission function combined with RS485 & pulse output will enable you to configure & monitor remotely. • The meter can calculate the active energy, reactive energy, demand, maximum demand and total harmonic distortion. • Multi-parameter monitoring: I, U, V, P, Q, S and PF etc. and load curves. |
|
|
Active-energy meters single-phase - direct 40 A The COUNTIS E0x is a modular energy meter displaying energies (kWh and kVArh) and other measurements directly on its backlit LCD display, allowing direct connection up to 40 A. COUNTIS E02, E04 and E06 are also MID certified. Advantages Compactness Only 1 module wide. Output (pulses) The pulse output enables the kWh consumption to be reported to a remote system (PC/BMS) so that it can be analysed for billing, energy saving or energy cost management purposes. MID certified B+D module COUNTIS E units comply with the MID directive to guarantee accuracy and reliability when metering, compulsory for energy billing applications. “Module B+D” certification guarantees that the design and manufacturing process of products are approved by an accredited laboratory. |
|
|
Active-energy meters single phase - direct 80 A The COUNTIS E1x is a modular energy meter displaying the energies (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display. It is designed for singlephase load metering and is used for direct connections of up to 80 A. Advantages RS485 (MODBUS), M-Bus communication, Ethernet or pulse outputs To easily centralise your consumption, COUNTIS E1x devices have either one pulse output, one RS485 output (MODBUS), M-Bus or Ethernet Modbus TCP communication. With RS485 communication models, you can configure your meters remotely. Multi-tariff Lets you assign different time slots (every hour, dip times) or different sources (normal, back-up) to your energy readings to monitor your energy consumption in more detail. MID certified B+D module COUNTIS E units comply with the MID directive to guarantee accuracy and reliability when metering, compulsory for energy billing applications. “Module B+D” certification guarantees that the design and manufacturing process of products are approved by an accredited laboratory. |
|
|
Active-energy meters three-phase - direct 80 A The COUNTIS E2x is a modular energy meter displaying the energies (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display. It is designed for three-phase networks and allows a direct connection of up to 80 A. Advantages RS485 (MODBUS), M-BUS, Ethernet communication or pulse outputs To easily centralise your consumption, COUNTIS E2x devices have either one pulse output, one RS485 (MODBUS), M-BUS or an Ethernet Modbus TCP communication output. With RS485 communication models, you can configure your meters remotely. Multi-tariff Lets you assign different time slots (every hour, dip times) or different sources (normal, back-up) to your energy readings to monitor your energy consumption in more detail. MID certified B+D module COUNTIS E units comply with the MID directive to guarantee accuracy and reliability when metering, compulsory for energy billing applications. “Module B+D” certification guarantees that the design and manufacturing process of products are approved by an accredited laboratory. |
|
|
Active-energy meters three-phase - direct 100 A The COUNTIS E3x is a modular energy meter displaying the energy and power consumed (kWh and kW) directly on its backlit LCD display. It is designed for three-phase load metering and is used for direct connections of up to 100 A. COUNTIS E32, E34 and E36 are MID certified. Advantages RS485 communication (MODBUS or M-BUS) or pulse output To enable the remote reporting of energy consumption, COUNTIS E3x are provided with either a pulse output or an RS485 communication output, with MODBUS or M-BUS protocol. In addition to their reporting functions, COUNTIS E3x with RS485 can be configured remotely and enable access to multimeasurement values. Detection of connection errors The product is protected against phase/neutral inversion and detects wiring errors. This simplifies the installation and commissioning, thereby reducing associated costs, and ensures that the device operates correctly. MID certified B+D module COUNTIS E products with MID certification provide the guaranteed accuracy required for applications in which sub-billing of the electrical energy consumed is necessary. “Module B+D” certification guarantees that the design and manufacturing process of products are approved by an accredited laboratory. Bi-directional metering (available only on the E33 and E35) This function is for metering energy production or energy consumption. Multi-measurement and load curve Display of electrical values (I, U, V, P, Q, S, PF) and load curve over a 7 day period via communication. |
|
|
Active-energy meters three-phase - via CT up to 12000 A The COUNTIS E4x is a modular electrical energy meter displaying the energies (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display. It is designed for three-phase load metering with connection via CT and is suitable for applications of up to 12000 A. COUNTIS E42, E44, E46 and E48 are MID certified. Advantages RS485 (MODBUS), M-BUS, Ethernet communication or pulse outputs To enable the remote reporting of energy consumption, COUNTIS E4x devices have either one pulse output, one RS485 (MODBUS), M-BUS or an Ethernet Modbus TCP communication output. In addition to their reporting functions, COUNTIS E4x with RS485 and Ethernet can be configured remotely and enable access to multi-measurement values. MID certified B+D module COUNTIS E products with MID certification provide the guaranteed accuracy required for applications in which sub-billing of the electrical energy consumed is necessary. “Module B+D” certification guarantees that the design and manufacturing process of products are approved by an accredited laboratory. Bi-directional metering This function is for metering energy production or energy consumption. Multi-measurement and load curve Display of electrical values (I, U, V, P, Q, S, PF) and load curve over a 3 day period via communication. |
|
|
Multi-utility pulse concentrator The COUNTIS ECix is a multi-utility pulse concentrator which communicates via an RS485 link using MODBUS protocol. It enables pulses from water, gas, compressed air, electricity meters and, for the COUNTIS ECi3, the output of analogue sensors (light, temperature, wind etc.) to be registered and stored. All data, ie. total and partial meters and load curves (available for all logical and analogue inputs) can be centralised via RS485 communication using MODBUS protocol. Advantages Up to 7 multi-utility meters and 2 analogue sensors • 7 digital inputs + 2 analogue inputs. • Total, partial and programmable metering (day, week, month, year). Load curves Load curves are available for each of the 7 logical inputs. A history of average values are available for the 2 analogue inputs (ECi3). RS485 MODBUS communication • Centralisation and transmission of pulse and analogue data to a supervision station. • Remote configuration of COUNTIS ECi device. Improved customisation • Selection of the measuring unit: kWh, m3, liters. • Selection of the currency unit: €, K€, £, $. Values can be displayed in the unit of your choice and energy costs can be directlycalculated. |
|
